Motion QED is a popular self-contained unit designed to store and calculate times, speeds and accelerations.

Specification:

Event Timer: From 2 to 8 readings, timing each event.

Interval Timing: From 1 to 4 readings: up to 4 successive obstructions on any combination of the four inputs can be measured and displayed.

Speed: From 1 to 4 readings: speeds (in meters per second, display shows m/s) are calculated and displayed for mask lengths of 1 to 10cm (in 1cm steps) or from 10 to 200cm (in 10cm steps).

Gap Timer: From 1 to 3 readings: similar to Interval Timing with only the leading edge of an obstruction being recognised so that times between gates are recorded and displayed.

Average Speed: 1 reading: based on the Gap Timing Mode above, this program calculates and displays an average speed (in m/s) between gates which are from 10 to 200cm apart (in 10cm steps).

Acceleration: 1 or 2 readings: for a vehicle carrying a single or double mask of known length passing through successive gates, the acceleration is calculated and displayed (as m/s/s).

A useful feature of Motion QED is the ability to measure times which students then use to calculate speeds or accelerations. Once the theoretical groundwork has been done, the unit can be used to perform the calculations directly, allowing students to concentrate on the physics.

Technical Details:

Inputs: 4 TTL inputs protected against misconnection up to 20V a.c. or d.c.; 4mm sockets with 1 “Manual” push-button.

Outputs: 12V to power external devices such as light gates; 4mm sockets

Power: 12 to 16V a.c. or d.c. from a low voltage power supply (B8C50636).

Protection: two internal 500mA anti-surge fuses.

Timing: times to ±1ms.

Mass: 0.9kg.

Size: 240 x 135 x 45mm.